Table of Contents
Advertisement
To unpack the shipment crate containing the rack cabinet (continued)
Step
3 Unload the system
A racked system is tall and top-heavy. It is easy to tip the rack
WA RN ING
over while moving it, which could result in injury or death.
Unloading the system safely requires the participation of four
persons exercising care so as not to topple the rack cabinet. Do
not stand in front of the rack as it rolls down the ramp.
Installation and User's Guide
Action
a Remove the two brace bolts attaching the
side brace assembly to the bottom pallet.
b Remove the side brace assembly.
c Lift the hinged slat and remove the ramp
anchor bolt.
d Place one end of the ramp on the pallet
ramp ledge.
e Insert the ramp anchor bolt and fold down
the hinged slat.
f Fold down the ramp's end flap.
g Ensure that the rack cabinet leveling feet
are retracted and that the cabinet casters
are rolling freely.
h Roll the system down the ramp using
extreme care.
i Carefully roll the rack toward its prepared
place within the measurement
environment.
Installing the System
Notes
•
To secure the ramp, you may place long
wood screws through the ramp and
into the ramp ledge.
•
In case the system must be moved in
the future, retain and reuse these
packing materials. You can also
purchase replacement packing
materials from Agilent Technologies.
2
67
Advertisement
Table of Contents
