To configure the LAN/GPIB gateway for functional verification
If your system includes an Agilent E5810A LAN/GPIB gateway, follow
these steps to configure the LAN/GPIB gateway in order to verify the
functionality of the performance modeling system.
NO TE
After functional verification, contact your corporate IT professional and
ask for a permanent server IP address assignment for the LAN/GPIB
gateway. For instructions on changing the server IP address, see the
LAN/GPIB gateway installation and configuration guide.
To configure the LAN/GPIB gateway
Step
20 Start the IC-CAP
*
software.
21 Add the interface to the
IC-CAP Hardware Setup.
* To familiarize yourself with the IC-CAP software, refer to the first three chapters of the Agilent IC-CAP 2004 User's Guide, model number
85190D.
† If there is an existing IC-CAP interface (for example, HP-IB), select the existing interface and click Delete Interface before continuing to
the next action.
This completes the installation process. To confirm the functionality of the
system, continue to
on page 91.
Installation and User's Guide
This procedure explains how to configure IC-CAP to use the default
LAN/GPIB gateway server IP address in order to verify the
functionality of the performance modeling system.
Action
PC version:
a Select Start > Programs > IC-CAP 2004 >
IC-CAP.
UNIX version:
a Open a UNIX terminal window.
b At the prompt, type iccap.
c Press Enter.
a From the IC-CAP/Main window menu bar,
choose Tools > Hardware Setup... .
b Below the HP-IB Interface group box, click
Add Interface.
c In the Add HP-IB Interface dialog box, enter
lan[192.0.0.192]:hpib.
d Click OK.
Chapter
Notes
•
This starts IC-CAP and opens the
IC-CAP/Status and IC-CAP/Main
windows.
•
This opens the IC-CAP/Hardware
†
Setup window.
•
This opens the Add HP-IB dialog box.
•
This configures the LAN/GPIB
gateway (with its default server
address) as the performance modeling
system GPIB interface.
3, "Verifying System Functionality," starting
2
Installing the System
89