Table of Contents
Advertisement
1
Introducing the Agilent 85225F Performance Modeling System
Component Integration
System component integration is performed at the Agilent Technologies
factory. The individual components are placed into the rack, and the
required cabling is connected between the instruments.
After factory integration, the system is tested to verify functional
performance.
The Agilent 85225F performance modeling system includes the following
components, as shown in
• Agilent E8364B PNA Series vector network analyzer
• Agilent 4156C precision semiconductor parameter analyzer with
• Agilent 11612V Option K11 bias network (port 1)
• Agilent 11612V Option K21 bias network (port 2)
• Agilent 4284A precision LCR meter
• Agilent 35670A dynamic signal analyzer
• Stanford Research SR 570 low noise current amplifier
• Agilent 85133F flexible test port cable set
• Agilent E3661B 1.6 meter rack cabinet
• filler panels, feedthrough panels, work surface, cables, and adapters
System front panel connections are listed in
illustrated in
System rear panel connections are listed in
illustrated in
* Customer supplied, not included with system.
48
optional Agilent 41501B SMU/PGU expander (or optionally Agilent
E5260A or E5270B)
Figure 19
Figure 20
Figure 18
on page 49:
on page 51.
on page 53.
*
Table 10
on page 50 and
Table 11
on page 52 and
Installation and User's Guide
Advertisement
Table of Contents
