Bar Code Field - Intermec EasyCoder E4 Programmer's Reference Manual

4. Bar Code Field

EasyCoder E4 Direct Protocol v2.10 – Programmer's Reference Manual
The Intermec Direct Protocol v. 2.10 supports 38 of the
most common bar code symbologies. Each bar code (optionally
including its human readable interpretation) makes up a bar code
fi eld.
In addition to the general formatting commands, PRPOS,
ALIGN, and DIR (see Chapter 4.2), a bar code fi eld can specify
the following properties:
• Bar Code Type
• Height (height of bar pattern)
• Ratio (wide bars/narrow bars)
• Magnifi cation (bar pattern)
• Bar Code Interpretation On/Off
• Bar Code Interpretation Font
• Bar Code Interpretation Font Size
• Bar Code Interpretation Font Slant
Select a Bar Code Type
The type of bar code is specifi ed by a BARTYPE command
containing an abbreviation of the bar code name. The abbrevia-
tion must be entered exactly as listed below.
BARTYPE | BT "<bar code name abbreviation>"
<bar code name...>
Default:
Reset to default by:
Chapter 4
the designation of the bar code type accord-
ing to the list below; it must be enclosed by
double quotation marks.
"INT2OF5"
PRINTFEED|PF
Label Design
25