Intermec EasyCoder E4 Programmer's Reference Manual page 32

Chapter 4 Label Design
4. Bar Code Field, cont.
30
Bar code interpretation printing can be enabled or disabled using
these commands:
BARFONT | BF ON
BARFONT | BF OFF
By default, bar code interpretation printing is disabled.
Summary
To create a bar code fi eld, the following formatting commands
must be given (in most cases default values may substitute
missing parameters). Input data and printing commands are
explained in Chapters 4.9 and 5.2 respectively.
Purpose
X/Y Position PRPOS | PP)
Alignment
Direction
Bar Code Spec BARSET
Human Readable
Examples:
PP 100,100:AN 7:DIR 4:
BARSET "CODE39",2,1,3,120:
BF "Swiss 721 Bold BT",20,0,5,1,1 ON ↵
PP 100,100:AN 7:DIR 4:
BARSET "CODE39",2,1,3,120:
NASC "OCR-A.NSC":
BF "OCR-A BT",20,0,5,1,1 ON:NASC 1 ↵
EasyCoder E4 Direct Protocol v2.10 – Programmer's Reference Manual
Command Default
0,0
ALIGN | AN 1
DIR 1
see above.
BF ON
Remarks
Number of dots
Select ALIGN 1–9
Select DIR 1–4
Can be replaced by
BT, BH, BR, BM
Off Can be omitted