Intermec EasyCoder E4 Programmer's Reference Manual page 111

1. Error Messages in Numeric Order, cont.
EasyCoder E4 Direct Protocol v2.10 – Programmer's Reference Manual
Code Description
1025 File does not exist.
1027 Out of transfer ribbon.
1031 Next label not found.
1027 Out of transfer ribbon.
1035 File pointer is not inside the fi le.
1037 No acknowledge received within specifi ed timeout.
1041 Error in fos structure.
1042 Internal error in mcs.
1054 Error when trying to write to device.
1055 Error when trying to read from device.
1057 File exists.
1058 Transfer ribbon fi tted.
1059 Cutter does not respond.
1061 Wrong type of media.
1101 Illegal character in bar code.
1102 Illegal bar code font.
1103 Too many characters in bar code.
1104 Bar code too large.
1105 Bar code parameter error.
1106 Wrong number of characters.
1107 Illegal bar code size.
Chapter 12 Error Messages
109