Intermec EasyCoder 601 XP Installation And Operation Manual page 47

Ribbon Load,
6b
#2
In case of 88-90 mm (3.5") ribbon width,
compress the bobbin and move it so it snaps into
the 2:nd groove.
6d
In case of 130 mm (5.1") ribbon width, com-
press the bobbin and move it so it snaps into the
4:th groove.
Intermec EasyCoder 601 XP – Installation & Operation Ed. 3
cont'd.
88 – 90 mm
(3.5")
130 mm
(5.1")
#4
Chapter 6
6c
110 mm
#3
In case of 110 mm (4.3") ribbon width, com-
press the bobbin and move it so it snaps into the
3:rd groove.
6e
#5
In case of 154 mm (6.0") ribbon width, com-
press the bobbin and move it so it snaps into the
5:th groove.
Thermal Transfer Printing
(4.3")
154 mm
(6.0")
46