Support Files - Intermec 6640 Technical Reference

Windows 2000
Hide thumbs Also See for 6640:
Table of Contents

Advertisement

Toolkit for the Computer

Support Files

" NOTE:
The Toolkit CD #2 contains the "\i386" folders from the Windows 2000 Professional CD and
from the Windows 2000 Service Pack 1. See the README.TXT file in the "\Docs" folder on
the Toolkit CD #1 for descriptions.
These files are installed using the Pen: General option of the toolkit. Files with
an asterisk (*) can only be run outside of Windows 2000. Any command prompt
boot-disk from Windows 95, Windows 98, or Windows Millennium are acceptable.
* 664NVPRM.EXE
Serial number, Ethernet EEPROM, nonvolatile data programmer. A prompt for
necessary information will appear.
Usage:
* CMOS.EXE
CMOS Editor, V1.01. Displays or modifies CMOS values. CMOS.EXE can read
the value at an address or range of addresses and write a value at a single ad-
dress. CMOS checksum is updated automatically if values are written.
Usage:
CRC32.EXE
File Integrity Verification Utility. Refer to the CRC files (CD_V101.CRC and
HC_V101.CRC) in the "\Docs" folder for the CRC values of each module on the
computer.
Usage:
filename is the filename on which the CRC is calculated. One or more files or
directories can be processed at one time.
pathname is the location of the files to be processed.
/s indicates all subdirectories should be searched for matching file names.
@ is (optionally) included in front of the filename to indicate it is an argument
file, which contains names of files to be checked by CRC32.EXE.
FLASH2K.EXE
BIOS flash update program which functions from within Windows 2000.
Usage:
–b writes to BIOS preserving the bootblock area.
<filename>.ROM File which contains the flash BIOS. Type "Flash2K" without
any parameters for system help.
* FLASH40.EXE
BIOS flash update program.
Usage:
–b writes to BIOS preserving the bootblock area.
<filename>.ROM File which contains the flash BIOS. Type "Flash40" without
any parameters for system help.
* H8FLASH.EXE
Power controller update program.
Usage:
<filename>MOT File which contains the power controller firmware.
4-32
6640/6650 Windows 2000 Technical Reference
664NVPRM (no parameters)
CMOS {address[=value] | address-address}
CRC32 [@][filename | pathname] [/s]
FLASH2K –b <filename>.ROM
FLASH40 –b <filename>.ROM
H8FLASH <filename>.MOT
SECTION 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

6650

Table of Contents