Using The Smartsystems Console To Upgrade The Computer - Intermec CK60 User Manual

Using the SmartSystems Console to Upgrade the Computer

CK60 Mobile Computer with Windows Mobile User's Manual
3 The operating system will boot and load files from the Secure Digital
card. The process is complete once the pen calibration screen is visible.
After this, remove the files from the Secure Digital card.
When the CK60 finishes booting, you may use it. You have reset the CK60
to its default configuration. You need to set the date and time and to set its
network communications parameters to reestablish communications with
the other devices in the wireless network.
Use the SmartSystems Console to upgrade the operating system on your
CK60. The console is part of SmartSystems Foundation and is available
from the Intermec web site via the IDL. Before you can upgrade your com-
puter, you need:
• the SmartSystems Foundation. To download SmartSystems Foundation,
go to www.intermec.com/idl
• the device upgrade .exe file, which is available from the Intermec web site
at www.intermec.com. Go to Service & Support > Downloads.
1 Install SmartSystems Foundation on your desktop or laptop computer,
then open the console.
2 Make sure the console and the CK60s are on the same subnet. For help,
contact your Intermec representative.
3 Make sure your CK60s are either in a communications dock or charging
dock, or that power management is disabled.
4 Download the device upgrade .exe file to your desktop or laptop
computer.
5 Double-click the .exe file on your desktop or laptop computer. An
InstallShield application starts and walks you through the process of
extracting the upgrade files in the default location.
Note: Do not change the default location where InstallShield extracts the
files. The SmartSystems Console requires the files be in this location.
6 From the SmartSystems Console, locate the device upgrade to install.
7 Drag-and-drop the device upgrade onto each CK60 icon.
Once the upgrade is done downloading to your CK60, your CK60 replaces
the operating system, then automatically performs a cold boot.
The SmartSystems Console shows your CK60 as offline (via a red stop sign)
until the device reboots and reconnects to the system.
Chapter 4 — Maintaining the Computer
and open the Device Management page.
107