Using The Smartsystems Console To Upgrade The Computer - Intermec 741 User Manual

Chapter 4 — Developing and Installing Applications

Using the SmartSystems Console to Upgrade the Computer

76
This shows the top of the computer. Note the keypad is facing downward.
2 Place the storage card in your desktop PC card reader, and then copy all
required upgrade files to the SD card.
3 Remove the SD card from your card reader and reinstall it in the
computer.
4 Press the Reset button inside the battery compartment to perform a
cold boot. Do not use force or a sharp object when pressing the Reset
button, or you may damage the Reset button.
This shows the back of the computer inside the battery compartment.
5 Return the computer to DC power, such as installing it into a dock
connected to external power.
6 When the Bootloader Menu shows "complete," remove the SD card,
then press the Reset button again to load the new operating system.
Note: The upgrade will fail if the computer is not connected to external
power. For help, see "Accessories" on page
7 When the computer finishes booting, insert the battery and then close
the battery door.
You may use the computer. You have reset the computer to its default
configuration. You need to set the date and time and to set its network
communications parameters to reestablish communications with the other
devices in the wireless network.
You can use the SmartSystems console to upgrade the operating system on
your computer. The console is part of SmartSystems Foundation and is
available from the Intermec web site via the Intermec Developer Library
(IDL). Before you can upgrade your computer, you need:
• the SmartSystems Foundation. To download SmartSystems Foundation,
go to www.intermec.com/idl
741 and 751 Mobile Computers (Windows Mobile 5.0) User's Manual
Storage Media Access Door
Reset button
93.
and open the Device Management page.