Using The Smartsystems Console To Upgrade The Computer - Intermec CK60 User Manual

Using the SmartSystems Console to Upgrade the Computer

CK60 Mobile Computer with Windows CE User's Manual
Note: The upgrade will fail if the CK60 is not connected to external
power. For help, see the accessories list in
puter" on page 19.
3 Insert the Secure Digital card in the CK60. For help, see
Secure Digital Card" on page
4 Using a stylus, press the Reset button inside the battery cavity.
Do not use force or a sharp object when pressing the Reset button, or
you may damage the button.
5 A prompt appears to state the PSM is updating. When this process is
complete, the CK60 performs a cold boot again and installs the files.
After the CK60 performs a cold boot, the Refreshing the File System
dialog box appears. Your CK60 is loaded with the new PSM files.
6 Remove the Security Digital card, insert the battery, then install the
battery door. You may use the CK60.
Use the SmartSystems Console to upgrade the operating system on your
CK60. The console is part of SmartSystems Foundation and is available
from the Intermec web site via the IDL. Before you can upgrade your
computer, you need:
• the SmartSystems Foundation. To download SmartSystems Foundation,
go to www.intermec.com/idl
• the device upgrade .exe file, which is available from the Intermec web site
at www.intermec.com. Go to Service & Support > Downloads.
To upgrade a CK60 using the SmartSystems Console
1 Install SmartSystems Foundation on your PC and open the console.
2 Make sure the console and the CK60s are on the same subnet.
3 Make sure your CK60s are either in a communications dock, or that
power management is disabled.
4 Download the device upgrade .exe file to your desktop PC.
5 Double-click the .exe file on your desktop PC. An InstallShield
application starts and walks you through the process of extracting the
upgrade files in the default location.
Note: Do not change the default location where InstallShield extracts
files. The SmartSystems Console requires files be located in the default
directory.
6 From the SmartSystems Console, locate the device upgrade to install.
7 Drag-and-drop the device upgrade onto each CK60 icon.
Chapter 4 — Maintaining the Computer
"Accessories for the Com-
16.
and open the Device Management page.
"Using the
67