Table of Contents
Advertisement
1
Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection and application of
Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its products
are incorporated into the final system design. Under no circumstances should any Yaskawa product be incorporated into any product or design as the
exclusive or sole safety control. Without exception, all controls should be designed to detect faults dynamically and fail safely under all
circumstances. All systems or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with
appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa must be promptly provided
to the end user. Yaskawa offers an express warranty only as to the quality of its products in conforming to standards and specifications published in
the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury,
property damage, losses, or claims arising from misapplication of its products.
Applicable Documentation
The following manuals are available for the CC-Link Option:
V1000 Option CC-Link Installation Manual
Manual No. : TOBPC73060022
L.RUN
SD
L.ERR
RD
Read this manual first.
The installation manual is packaged with the CC-Link Option and contains a basic overview of wiring, settings, functions, and fault diagnoses.
V1000 Option CC-Link Technical Manual
Manual No. : SIEPC73060022
The technical manual contains detailed information and command registers.
To obtain the technical manual access the site below:
http://www.e-mechatronics.com
V1000 Series AC Drive Technical Manual
This manual describes installation, wiring, operation procedures, functions, troubleshooting, maintenance, and inspections to perform before operation.
To obtain instruction manuals for Yaskawa products, access the site below:
STOP
http://www.e-mechatronics.com
V1000
V1000 Series AC Drive Quick Start Guide
(Hz)
Freq Reference
:
FWD / REV Sel
:
Output Freq
:
(Hz)
Output Current
:
(A)
Selected Monitor
:
(V)
Monitor
:
Verify
:
SetUpGuide
:
Parameter Set
:
Auto-Tuning
:
WARNING
Risk of electric shock.
Read manual before installing.
This guide is packaged together with the product. It contains basic information required to install and wire the drive. This guide provides basic programming
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to
requirements, make sure
to ground the supply neutral for 400V class.
Risque de décharge
and simple set-up and adjustment.
AVERTISSEMENT
électrique.
Lire le manuel avant l'installation.
Attendre 5 minutes après la coupure de l'alimentation,
pour permettre la décharge des condensateurs.
Pour répondre aux exigences
, s assurer que le
neutre soit relié à la terre, pour la série 400V.
Terms
Note: Indicates supplementary information that Yaskawa highly recommends be followed, even though equipment may not be at risk.
Drive:
Yaskawa AC Drive -V1000 Series
CC-Link Option:
Yaskawa AC Drive -V1000 Option CC-Link
≥ 1011:
Indicates a drive feature or function that is only available in drive software version 1011 or later.
Registered Trademarks
• CC-Link is a registered trademark of the CC-Link Partner Association.
• Other company names and product names listed in this manual are registered trademarks of those companies.
YASKAWA ELECTRIC SIEP C730600 22C V1000 Option CC-Link Technical Manual
Option Unit
Yaskawa Drive
1 Preface and Safety
5
Advertisement
Table of Contents
