European Standards - YASKAWA SI-C3/V Technical Manual

Hide thumbs Also See for SI-C3/V:
Table of Contents

Advertisement

11

European Standards

Figure 22
The CE mark indicates compliance with European safety and environmental regulations. It is required for engaging in business and commerce in
Europe.
European standards include the Machinery Directive for machine manufacturers, the Low Voltage Directive for electronics manufacturers, and the
EMC Directive for controlling noise.
This CC-Link Option displays the CE mark based on the EMC Directive.
EMC Directive: 2014/30/EU
Drives used in combination with this CC-Link Option and devices used in combination with the drive must also be CE certified and display the CE
mark. When using drives displaying the CE mark in combination with other devices, it is ultimately the responsibility of the user to ensure
compliance with CE standards. Verify that conditions meet European standards after setting up the device.
 EMC Directive Compliance
This CC-Link Option is tested according to European standards EN 61800-3:2004/A1:2012 and complies with EMC Directive. The CE marking is
declared based on the harmonized standards.
EMC Directive Installation Conditions
Verify the following installation conditions to ensure that other devices and machinery used in combination with this CC-Link Option and drives
also comply with EMC Directive:
1.
Use dedicated shield cable for the CC-Link Option and external device (encoder, I/O device, master), or run the wiring through a metal
conduit.
2.
Keep wiring as short as possible and ground the largest possible surface area of the shield to the metal panel according to
Figure 23
Option Installation for CE Compliance: Model SI-/V
Figure 24
YASKAWA ELECTRIC SIEP C730600 22C V1000 Option CC-Link Technical Manual
A – Braided shield cable
B – Metal panel
EMC filter
Three
R
L1
L1
phase
L2
L2
S
power
L3
L3
T
supply
Figure 24 CC-Link Option Installation for CE Compliance
Figure 22 CE Mark
C
B
C – Cable clamp (conductive)
Figure 23 Ground Area
Enclosure panel
Drive
Communication
option
SI-
/V
11 European Standards
A
Cable clamp
Master
Figure
24.
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac drive-v1000 option cc-link

Table of Contents