Table of Contents
Advertisement
3
Receiving
Please perform the following tasks after receiving the CC-Link Option:
• Inspect the CC-Link Option for damage.
If the CC-Link Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
• If you have received the wrong model or the CC-Link Option does not function properly, contact your supplier.
Contents and Packaging
Description:
Option unit
–
Quantity:
1
Tool Requirements
A Phillips screwdriver (M3, M3.5 to M6
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare CC-Link cables for wiring are not listed in this manual.
YASKAWA ELECTRIC SIEP C730600 22C V1000 Option CC-Link Technical Manual
Table 2 Contents of Package
Ground Cables
4
) metric or (#1, #2
) U.S. standard size is required to install the CC-Link Option.
<1>
<1>
Figure
2).
Warning Label Stickers
1
3 Receiving
Installation Manual
MANUAL
1
9
Advertisement
Table of Contents
