YASKAWA SI-C3/V Technical Manual page 15

5 Installation Procedure
5.
Connect the CC-Link Option to the drive.
Properly secure the tabs on the left and right sides of the CC-Link Option to the drive case.
Figure 12
6.
Connect the ground cable from the drive ground terminal to the CC-Link Option ground.
When wiring the CC-Link Option, pass the ground cable through the inside of the drive bottom cover, then pass the ground cable into the
through-hole at the front of the CC-Link Option.
Figure 13
7.
Connect the communications cable to the terminal block. Refer to Procedure on page 17.
8.
Attach the CC-Link Option cover to the front of the CC-Link Option.
Figure 14
Note: When using the drive in an area that may require displaying warning information in Japanese or Chinese, a sticker has been provided with the CC-Link Option. This
sticker can be placed over the English and French warnings on the front of the CC-Link Option.
16
tabs should line up
tabs should line up
Figure 12 Attach CC-Link Option
ground cable
Pass the ground cable through
through-hole
the bottom cover of the drive.
for ground cable
ground
cable
Figure 13 Ground Cable Connection
Figure 14 Attach Cover
drive ground terminal
tabs should line up
YASKAWA ELECTRIC SIEP C730600 22C V1000 Option CC-Link Technical Manual