2 Removing parts from the lower section of the packaging
Unpacking and Installation Instructions CEREC Primescan AC, Primescan AC, CEREC Omnicam AC, Omnicam AC
4
2
Removing parts from the lower section of
the packaging
1. Remove the monitor cable and place this to one side next to the
packaging.
2. Lift off the upper part of the packaging (A).
3. Remove the monitor (B) from the lower part of the packaging and
place it down on an even surface on its front, protected so that this
is not damaged.
4. Remove the scanner (C).
Dentsply Sirona
6681790 D3696
D3696.031.01.01.02 09.2018