Harris RF-7800W Student Manual page 77

• Now you will disconnect the cable from each of the FE 0/0 ports.
• Connect a straight through Cat. 5 cable from Router A to the POE adapter
connected to Radio A.
• Connect another straight through Cat. 5 cable from Router B to the POE
adapter connected to Radio B
• After connecting the routers to the power bricks, try your call/ping test
again.
Now that you have ensured that your network works, we will install the radios.
Radio A will have 192.168.1.34 as an IP
Radio B will have 192.168.1.38 as an IP
Ensure that the crossover cable used to connect both routers was not used to
connect a router to a power brick. As a reminder, the IP's used are for training
The mission IP's will be provided by the unit NET Tech.
70
Lab B
Note:
only.