Cut Sheets - Harris RF-7800W Student Manual

Before setting up your mast, radio or antenna, contact
the BDE NetOps and request the cut sheet which
should have:
Grid coordinates where your mast should be located
•
• Azimuth, which is location your antenna should point to the
other antenna
• Frequency
• Channel size in MHz (10,20,40)
• IP address of radio which you will connect to so you can test
the connection
WARNING: Radios start transmitting as soon as they have power applied via the Ethernet cable.
WARNING: Do not connect or disconnect the RF cable while the Ethernet cable is connected.
Cut Sheet
Harris RF-7800W
29