Harris RF-7800W Student Manual page 36

Table of Contents

Advertisement

• This is the login screen for
a 7800W Radio
• Both the default username
and password is: admin
Setting up Radios for First time Use:
System Login
On the PC, open a browser (Internet Explorer 6 or higher recommended). For
new systems, enter the default IP address (192.168.25.2 or 192.168.26.2). The
following dialog should be displayed:
Ethernet Mode: Select the operating mode of the Ethernet port.
Auto - Auto-negotiate the speed connection speed.
10 - Operate at 10Base-T only.
100 - Operate at 100Base-T only.
HD - Operate at half-duplex only.
FD - Operate in full duplex only.
Important: The auto-negotiate feature does not detect the speed and duplex of
manually set Ethernet equipment. The auto-negotiate feature works correctly
only when both communicating Ethernet devices are configured for auto-
negotiate. Duplex mismatches may result in an unexpected loss of
communications.
If your link is unstable and you know that you have perfect line of sight to the
distant end radio, try setting your Ethernet mode of 100 FD.
Radio Configuration (2)
31 

Advertisement

Table of Contents
loading

Table of Contents