Harris RF-7800W Student Manual page 51

Deploying the BlueSky Series II Mast
The Tripod
• Inspecting the Site before Deployment
• Ensure that there are no overhead wires or power lines.
• Make sure that the location offers safe deployment of guy wires, if
required.
• Ensure there is enough space to guy the mast, if required.
• Ensure the ground is capable of holding grounding stakes.
• Remove the Mast & Accessories
• Remove the Pole Bag and set it next to the Carry Bag.
• Remove the Stake Bag and set it next to the Carry Bag.
BlueSky Mast Setup (2)
45