EA Technology UltraTEV Monitor Operating Manual page 82

EA Technology
Depending on the current installation status, another status may be set. The following table explains
the different installation statuses.
Pending The Pending status is for when an installation has been created but no data
has been received yet. Once device registration has occurred (or the first
message has been received) then the status will automatically change to
Active. The Pending status also signals that changes to the installation can
still be made.
Active When an installation is Active, it means the system is switched on by the
user and receiving data.
Idle An idle installation has been started by the user but hasn't received any
messages from the device in a period of 60 minutes.
Ceased If an installation has been taken out of service and will no longer be sending
any data it can be marked as Ceased. When this status is applied, the
middleware will be instructed to no longer hold onto incoming messages for
this installation.
Archived If access to the data of a Ceased system is no longer required, the database
for that system can be moved to another storage area. In this case, the status
can be set as Archived.
UltraTEV Monitor Operating Manual
TM
79
2178L014