Smtp Settings - EA Technology UltraTEV Monitor Operating Manual

EA Technology
Select the user you wish to configure subscriptions for and click on the action button. Figure 49
shows how this next stage might look. From this screen a list of all configured alarms is shown.
Simply select which alarms you would like to receive notifications for and the method (E.g. SMS or
email or both).
Figure 49: Modifying notification subscriptions

13.1 SMTP Settings

In order that users may receive alarm notifications by e-mail, the UltraTEV Monitor must connect to
a valid SMTP server. The required settings values can usually be obtained from your IT team, and a
brief description of each is below.

SMTP Host Address – This is the address (IP or DNS) at which the SMTP server can be located.
This address must be accessible from the UltraTEV Monitor unit.

SMTP Host Port – The TCP port through which the UltraTEV Monitor can connect to the SMTP
server. This is usually 25 or 2525.

Secure SMTP Server? – Check this box if a username and password is required to connect
to and forward e-mails through to SMTP server.

Username – The username to use if the SMTP server requires one. (See previous setting)
 Password – The password to use if the SMTP server requires one. (See previous setting)
Note: that if you include a Username and Password value, but do not check the "Secure SMTP
Server?" checkbox, the Username and Password will not be used when connecting to the SMTP
server. If the checkbox is checked but the Username and Password fields are not supplied, the
software will not be able to connect to and forward e-mails through the SMTP server.
UltraTEV Monitor Operating Manual
TM
58
2178L014