Configuring The Ultratev Monitor; Connecting To The Ultratev Monitor; The Local Ultratev Monitor™ Web-Interface - EA Technology UltraTEV Monitor Operating Manual

Table of Contents

EA Technology

10 Configuring the UltraTEV Monitor™

All initial configuration of the UltraTEV Monitor™ is performed locally via a web interface. This can

either be via a direct connection to port 4 of the device or through a local network / Wi-Fi connection.

Once the system has been configured, access to the UltraTEV Cloud version will be via the UltraTEV

Cloud web portal only.

To connect to the local user interface, there are a couple of options; the first being via a corporate

LAN. Ethernet ports 1 and 2 are bridged internally. Port 1 can be connected to a corporate LAN if

available and port 2 can then be connected to a laptop. This laptop will then also be able to connect

to the corporate LAN. To use this option, the hub will have to be preconfigured by EA Technology.

Once you know the IP address of the hub, type this into your internet browser's address bar.

The second option is more straight-forward. A direct Ethernet connection can be achieved by

plugging a laptop into Ethernet port 4. Providing that your laptop is set to be dynamically allocated

an IP address (as is normally the case), it should be allocated an IP address by the Hub. In this

scenario, type the address 192.168.0.200 into your internet browser's address bar.

In either option, you will first access the login screen. Use the following credentials to access the

web-site:

Username: localuser

Password: eatl/eatl

10.2 The Local UltraTEV Monitor™ Web-Interface

The UltraTEV Monitor has two different configurations, Standard or UltraTEV Cloud™ enabled.

Once connected and logged in, you will be greeted with the main home page. Figure 299 shows

how the main navigation bar looks. You can see the monitoring status indicator. This will be green

if everything is running, orange if only some services are running and red if no services are

running. See section "Device Management and Settings" for more details on this. Please note that

for devices connecting to UltraTEV Cloud™, there will be no analysis option on the device itself.

Please see section 16 UltraTEV Cloud™.

Figure 29: UltraTEV Monitor Web-Interface

Figure 30a: UltraTEV Monitor Web-Interface Stand-Alone

UltraTEV Monitor

Operating Manual

2178L014

Table of Contents