EA Technology UltraTEV Monitor Operating Manual page 48

EA Technology
Figure 33: System Discovery results
Figure 34: System Discovery results when using a configuration file
After you are happy with the discovered Nodes and Sensors, another view of the installation layout
is given, see Figure 355. If the discovered Sensors don't match the contents of the configuration file
or previous installation, or if this is brand-new system discovery, then the sensors need to be placed
on to the layout diagram.
First of all drag the hub from the palette on the left and place it on the substation layout. When
hovering over an area that can be placed on, the area will turn green.
Once the hub has been placed, the first Node is then available in the palette, again drag this onto
the layout. Once the first Node has been placed, the palette then changes to now show the available
sensors for that Node.
Once all additional Sensors have been placed for the current node, click on the Next button to move
to the next Node. At any time, the Prev and Next buttons can be used to navigate the current string
of Nodes.
UltraTEV Monitor Operating Manual
TM
45
2178L014