Connecting To Network Using Wi-Fi; Communications (Wall-Mount Only) - EA Technology UltraTEV Monitor Operating Manual

EA Technology
9.2

Connecting to Network using Wi-Fi

To connect to the network using Wi-Fi you must first configure the Hub for your Wi-Fi network. Do
to this; you will need to temporarily connect a VGA display, USB keyboard and mouse. Do not
connect these until after the Hub has fully booted. In this mode, the user is 'client' with no password.
You can then use standard MS Windows 7 Wi-Fi configuration methods.
Note: do not reboot the Hub with the keyboard and mouse connected or it may not boot correctly.
Once you've made the Wi-Fi connections, these devices will no longer be needed.
9.3 3G Communications (Wall-Mount Only)
To connect the UltraTEV Monitor Hub to the internet using 3G communications, you will require a
valid SIM card and Mobile Broadband Access Point Name (APN) settings that should be requested
from your 3G SIM card provider.
To configure UltraTEV Monitor Hub to work on your preferred 3G network and to gain remote access
to your data, please contact EA Technology Product Support.
To obtain remote access to your data, in certain circumstances, you may need to
request a static IP address from your 3G SIM card provider.
UltraTEV Monitor Operating Manual
TM
40
2178L014