Installation Status - EA Technology UltraTEV Monitor Operating Manual

EA Technology
View Equipment List – Displays a list of the equipment used in this installation. This
list can be printed.
Download Installation Configuration File – Downloads the file needed to complete
the installation setup on the UltraTEV Monitor™ device.
Notification Configuration – Configure notification settings for this installation.
Analyse Data – View the data from this installation and perform any analysis tasks.
View Nodes – View the nodes that are connected in this installation. From here
alarms can be configured.
View Alarms – View the active and historic alarms for this installation.
Before visiting the substation to continue installation, you must first download
the Installation Configuration File.

16.5 Installation Status

By clicking on the current installation status from the list of installations, the status of the installation
can be seen. Figure 68 shows an example of this screen. From here we can see when the last
heartbeat was received from the UltraTEV Monitor™. Heartbeats are sent every 30 seconds to indicate
that the device is running. The last sample time is the time of the last sample from the UltraTEV
Monitor™. This is the time of the sample on the device, not the time it was received at the server.
Figure 68: Installation status screen
UltraTEV Monitor Operating Manual
TM
78
2178L014