EA Technology
9
Network Communications
UltraTEV Monitor Hubs do NOT have malware protection software preinstalled.
Please contact EA Technology if you require any additional protection to be
installed with the unit.
9.1
Connecting to a Network using an Ethernet cable
Connect Ethernet cable (minimum CAT5e) between your network and the Hub Unit Ethernet port 1.
Depending on the network you have connected to, you may require additional information from your
IT department to establish communications with the Monitor.
In the Standard, you can configure the network Connections in Admin, Network Settings.
Click in Actions and you can select an IP address automatically or configure a static IP address.
UltraTEV Monitor
Operating Manual
TM
39
2178L014