EA Technology
17.3 Wall Mount Hub and Power Supply
17.3.1 Hub Unit Controls
The Wall Mount Hub is supplied with NO user interface controls. However the instrument maybe
controlled locally using either, a wired or wireless connection via a Laptop or Tablet PC.
Alternatively, access to the Hub may be gained through a remote desktop connection.
Reset button:
17.3.2 Power Supply Controls
The Power Supply has NO user interface controls. To switch the power on and off use a mains outlet
with a switch.
17.3.3 Power Supply Input
Voltage:
Frequency:
Maximum Power:
Fusing:
17.3.4 Power Supply Output
Hub Unit Power:
Node Power:
Phase Reference:
Fusing:
NOTE: All fuses are 5 x 20 mm cartridge type
17.3.5 Optional 48V Power Supply Input
Voltage In:
Phase Reference Frequency:
Maximum Power:
Fusing :
17.3.6 Optional 48V Power Supply Output
Hub Unit Power:
Node Power:
Phase Reference:
Fusing:
NOTE: All fuses are 5 x 20 mm cartridge type
17.3.7 Hub Unit Indicators
System Power:
UltraBus Power:
Monitor Health:
Alarm, SCADA Outputs 1-3: 4x
UltraTEV Monitor
Operating Manual
TM
Micro-switch accessed by hole in the enclosure
110-230V AC (nominal)
50-60 Hz (nominal)
350W
2x Anti-surge (T) 5A Double Pole Fusing
Minimum 1000A Breaking Capacity
1x Fast (F) 100mA
12V DC, Maximum 5A
48V DC, Maximum 5.2A
9V AC, Maximum 100mA, Short-circuit Protected
1x Anti-surge (T) 7A Fuse
1x Anti-surge (T) 8A Fuse
48V DC
50-60 Hz (nominal)
350W
1x Anti-surge (T) 5A Fuse
12V DC, Maximum 5A
48V DC, Maximum 5.2A
9V AC, Maximum 100mA
1x Anti-surge (T) 7A Fuse
1x Anti-surge (T) 8A Fuse
1x
Green LED
1x
Green LED
1x
Green LED
Red LED
82
2178L014