Table of Contents
Advertisement
EA Technology
3.5.4 Hub Controls
The Hub Unit is controlled via a web-based user interface. For details on how to connect, please refer
to chapter 10.1, Connecting to the UltraTEV Monitor.
The Monitor is designed to be switched on and running all the time. It can be shut down from the
web interface, and will restart while it is plugged in to the mains. However, should the web interface
be unavailable, the Hub Unit is equipped with a reset button.
The Hub Unit also features a Data Download Button. Simply insert a USB stick into either USB port,
press the Data Download Button, and the Hub will copy the Monitor database onto the USB stick for
later analysis.
3.6
Wall Mount System Outline
The UltraTEV Monitor system consists of a Hub Unit, a separate Power Supply and at least one or
more Nodes with associated peripherals. The Nodes each contain TEV and temperature sensors.
Further TEV, Cable PD and ultrasonic sensors may be connected to the Nodes to match the
requirements of the substation.
The
Hub
Unit
is
acquisition
unit
collection, processing, interpretation and
presentation to the user. In some variants the
Hub is unit may be responsible only for
controlling the flow of data from Nodes to the
UltraTEV Cloud.
The
Power
Supply
powering the Hub Unit and measurement
Nodes.
UltraTEV Monitor
a
specialised
data
responsible
for
data
is
responsible
Operating Manual
TM
Figure 4: UltraTEV Monitor Hub Unit
for
Figure 5: UltraTEV Monitor Power Supply
14
2178L014
Advertisement
Table of Contents
