EA Technology UltraTEV Monitor Operating Manual page 39

EA Technology
Figure 24: Example loopback set up on UltraBUS channel 1 (maximum 30 Nodes per string)
Two ferrite chokes should be fitted on the cable that connects the first Node in the string to the Hub
Unit. One choke should be fitted at each end of the cable as shown in Figure 25. To install, release
the clips on the side of the choke and loop the cable through the core once before clicking the choke
closed.
Figure 25: Hub Unit with two Nodes, showing noise suppression ferrites chokes.
UltraTEV Monitor Operating Manual
TM
36
2178L014