Creating And Managing Alarms - EA Technology UltraTEV Monitor Operating Manual

EA Technology
Figure 37: System Status

11 Creating and Managing Alarms

The creation of alarms can be undertaken on either the device or the web-portal in exactly the same
manner. The rest of this section assumes that this process is being performed on the device web
page.
Select the Alarm Configuration button. The screen in Figure 38 will then appear. This screen shows
the list of connected nodes on the system.
Figure 38: Connected nodes view
There are a couple of actions that can be performed on each node, detailed below:
UltraTEV Monitor Operating Manual
TM
48
2178L014