Table of Contents
Advertisement
EA Technology
Figure 32: Basic installation information
After the Nodes and Sensors are discovered, the results will be as shown in Figure 333, or Figure
344 if using a configuration file. At this stage there are four options.
Breakdown
Use this option if you want more detail of the Nodes and Sensors found
during system discovery.
Power off the
Use this option if you want to change any of the Nodes around or check
Nodes
connections before rediscovering.
Rediscover
Use this option if you are convinced everything is connected correctly having
checked the connections.
Continue
Use this option if you want to continue with what has been discovered.
UltraTEV Monitor
Operating Manual
TM
44
2178L014
Advertisement
Table of Contents
