Adjusting The Lap Belt; Delivery; Final Inspection; Transport To The Customer - Otto Bock Zenit Instructions For Use Manual

Delivery

48

6.11 Adjusting the lap belt

CAUTION
Incorrect approach to the adjustment process
Injuries, malpositions, user discomfort due to adjustment errors
► The qualified personnel is responsible for the individual positioning and fitting of the belt system.
► Adjusting the belt system too tightly may lead to unnecessary pain or user discomfort.
► Adjusting the belt system too loosely can cause the user to slide into a dangerous position. In addition, the
fastening snaps could open unintentionally if they slide against hard parts of clothing (e.g. buttons).
CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to incorrect information
► The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under­
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/care staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.
Information on the settings can be found in the manufacturer's instructions for use accompanying each product.
7 Delivery

7.1 Final inspection

A final check must be carried out before the wheelchair can be handed over:
• Are all options installed according to the order form?
• Are the drive wheels correctly positioned?
• Do the quick-release axles rotate freely and lock securely?
• Have the tyres been correctly inflated?
INFORMATION: The correct tyre pressure is printed on the tyre sidewall. For drive wheels with high-
pressure tyres, the minimum air pressure is 7 bar.
• Only after adjustment: Have the brakes (wheel locks) been adjusted correctly?
• Only after adjustments: Has the respective caster journal angle been adjusted vertically?
• Only after adjustments: Has the anti-tipper been adjusted correctly?

7.2 Transport to the customer

NOTICE
Use of unsuitable packaging
Damage to the product caused by transportation using incorrect packaging
► Use only the original packaging for delivery of the product.
The wheelchair should be transported to the user in disassembled state using the outer packaging.
24 Zenit