D Id-Rp2D/Id-Rp2V; I Options - Icom ID-RP2 Instruction Manual

D D ID-RP2D/ID-RP2V
Frequency range Receive
Transmit
Type of emission
Frequency stability
Frequency resolutions
Antenna connector
Communication speed
Power supply requirement
Current drain Tx (High)
Tx
Rx Stand-by
Usable temperature range
Dimensions
(proj. not incl.)
Weight
(approx.)
Tx output power High
Low
(at 13.8 V DC)
Modulation system
Occupied bandwidth
Spurious emissions
Receive system
Intermediate freq. 1st
2nd
3rd
Sensitivity
(BER 1×10
Selectivity
Receive spurious
Spurious and image
rejection ratio

I Options

ID-RP2D
1.2 GH DATA REPEATER
Z
ID-RP2V
1.2 GH DIGITAL VOICE REPEATER
Z
ID-RP2L
10 GH MICROWAVE LINK REPEATER
Z
AH-106
10 GH PARABOLIC ANTENNA
Z
AH-107
10 GH PARABOLIC ANTENNA
Z
AH-108
1.2 GH COLLINEAR ANTENNA
Z
Less than 6.0 A
(Low) Less than 2.7 A
Less then 0.7 A
483(W)×88(H)×428(D) mm; 19(W)×3
6.2 kg; 13 lb 10 oz
Less than 130 kHz
Double-conversion superheterodyne
Less than 2.24 µV
–2 )
More than 140 kHz/6 dB
Less than 520 kHz/40 dB
(800 (d))
(450 (d))
ID-RP2D
1240 to 1300 MHz
1240 to 1300 MHz
F1D (GMSK)
±2.5 ppm (based on 25˚C; +77˚F)
5/6.25 kHz
Type-N (impedance: 50 Ω)
128 kbps
13.8 V DC ±15% (negative ground)
–10˚C to +50˚C; +14˚F to +122˚F
9–12 W
0.5–1.2 W
Quadrature (243.95 MHz)
Less than –50dB
243.95 MHz
10.7 MHz
N/A
Less than –57 dBm
More than 60 dB (General)
More than 50 dB (IF and
All stated specifications are subject to change without notice or obligation.
48
SPECIFICATIONS AND OPTIONS
ID-RP2V
F1D (GMSK)
*F7W for system operation
4.8 kbps
Less than 7.0 A
Less than 3.0 A
Less than 1.0 A
15 27
⁄ (H)×16
32
7.5 kg; 16 lb 9 oz
6–12 W
0.5–1.2 W
Less than 5.5 kHz
Triple-conversion superheterodyne
243.95 MHz
31.05 MHz
450 kHz
Less than 0.45 µV
More than 6 kHz/6 dB
Less than 18 kHz/50 dB
IF
⁄ )
2
9
⁄ (D) in.
32