Icom ID-RP2 Instruction Manual page 23

Select
Click
Click
y Insert the supplied CD into the CD drive, select "In-
stall the software automatically (Recommended),"
then click [Next>].
u The wizard starts searching for the driver and
shows the dialog as at left during search.
i While searching the driver, the "Hardware Installa-
tion" dialog box appears as at left.
Click [Continue Anyway] to start the installation.
NOTE: If the dialog as at left does not appear,
select "Install from a list or specific location (Ad-
vanced)" in step y, then select the driver folder
in the CD.
20
DRIVER INSTALLATIONS
Continue to the next page.
5