I Microsoft Windows 98/Me - Icom ID-RP2 Instruction Manual

I Microsoft
® Windows
Select
Select
® 98/Me
Click
Click
Click
28
DRIVER INSTALLATIONS
q Start up the Windows.
• Quit all applications if activated.
w Insert the CD that comes with the ID-RP2C, into the
CD drive.
e Connect the PC and ID-RP2C [SERVICE1] con-
nector using with an USB cable
.
separately)
r The "Add New Hardware Wizard" will come up as
at left.
Click [Next>].
t Insert the supplied CD into the CD drive, select
"Search for the best driver for your device. (Recom-
mended).", then click [Next>].
y Click to add the check mark, "✔," into "Specify a lo-
cation:," then click [Browse...].
NOTE: Remove the check mark, "✔," from
"Floppy disk drive," "CD-ROM drive" and "Mi-
crosoft Windows Update" to prevent the incorrect
driver selection.
(A-B type; purchase
Continue to the next page.
5