Important Safety Instructions - Xantrex BC3012 User Manual

Important Safety Instructions

WARNING
This chapter contains important safety and operating instructions as prescribed by UL and
CSA standards for chargers used in residential, RV, marine and automotive applications.
Read and keep this Owner's Guide for future reference.
1. Before installing or using the Xantrex BC3012, BC5012, BC1524 or BC2524
Battery Charger (BC Series), read all instructions and cautionary markings on
the BC Series, the batteries, and all appropriate sections of this guide.
2. Do not expose the BC Series to rain, snow, spray, or bilge water. To reduce risk
of fire hazard, do not cover or obstruct the ventilation openings. Do not install
the BC Series in a zero-clearance compartment. Overheating may result.
3. Use only attachments recommended or sold by Xantrex. Doing otherwise may
result in a risk of fire, electric shock, or injury to persons.
4. The BC Series is designed to be permanently connected to the AC and DC
electrical systems. Xantrex recommends that all wiring be done by a certified
technician or electrician to ensure compliance with the local and national
electrical codes relevant to your installation. It is the responsibility of the
installer to ensure that the installation of the BC Series complies with all
relevant electrical codes.
5. To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that wire is not undersized. Do not operate the BC Series
with damaged or substandard wiring.
6. Do not disassemble the BC Series. It contains no user-serviceable parts.
Attempting to service the BC Series yourself may result in a risk of electrical
shock or fire.
NOTE: Disassembling the BC Series will void your warranty.
7. To reduce the risk of electrical shock, disconnect both AC and DC power from
the BC Series before attempting any maintenance or cleaning or before working
on any circuits connected to the BC Series. Turning off will not reduce this risk.
v