Table of Contents
Advertisement
Operation
Table 2-1 Reading BC Series Status
Charger Status
Battery too hot fault
Battery too cold fault
Charger fault condition.
The charger is damaged, contact service.
Remote Display Reporting While Charging and Equalizing
After configuration, the BC Series defaults to a scrolling display. As long as
there are no faults or errors to report, the remote will display the following
information, in order, for the bank presently being charged:
•
•
•
If there is a fault or warning related to one of the banks, the fault or warning
information will display in the scrolling display before the charging state for
the bank presently being charged. Charging for banks not in fault will
continue (see "Error Messages on Optional Remote Display" on page 3–4).
Charging for the bank in fault will resume once the fault condition is
cleared.
Remote Display Reporting While Battery Monitoring
The BC Series is considered to be battery monitoring if it is experiencing a
charger level fault. If there is a charger level fault (affecting all banks), all
charging will be suspended until the charger fault is resolved (see "Error
Messages on Optional Remote Display" on page 3–4).
The remote will display all of the following, in order:
•
•
2–14
Charging Stage
Battery Voltage
Charger Current
Highest level charger fault or warning
Bank 1 Highest level bank fault or warning (if present)
Onboard Status Indicator Lights
Fault indicator light illuminated
100% current indicator light flashes
Fault indicator light illuminated
10% current indicator light flashes
Fault indicator light flashes
Remote
Display
E R R
H o T
E R R
C L D
E R R
C H F
975-0188-01-01
Advertisement
Table of Contents
