Table 3-1 Reading XC Series Status
Charger Status
Battery too hot fault
Battery too cold fault
Charger fault condition.
The charger is damaged, contact service.
Reporting While Charging or Equalizing
After configuration, the XC Series defaults to a scrolling display. As long as there
are no faults or errors to report, the remote will display the following information,
in order, for the bank presently being charged:
•
Charging Stage
•
Battery Voltage
•
Charger Current
If there is a fault or warning related to one of the banks, the fault or warning
information will display in the scrolling display before the charging state for the
bank presently being charged. Charging for banks not in fault will continue (see
"Error Messages on Remote Display" on page 4–4). Charging for the bank in fault
will resume once the fault condition is cleared.
975-0187-01-01
Accessing Charger Information
Remote
Display
Onboard Status Indicator Lights
Fault indicator light illuminated
E R R
100% current indicator light flashes
H o T
Fault indicator light illuminated
E R R
10% current indicator light flashes
C L D
Fault indicator light flashes
E R R
C H F
3–13