Tip-Assist; Using The Tip-Assist; Front Frame; Lap Belt (Seat Belt) - Otto Bock Avantgarde XXL 2 Instructions For Use Manual

Hide thumbs Also See for Avantgarde XXL 2:
Table of Contents

Advertisement

7.12.2 Tip-assist

The tip-assist makes overcoming obstacles easier for the attendant.

7.12.2.1 Using the tip-assist

For this wheelchair type, the tip-assist is integrated into the frame (see fig. 40).
1) At an obstacle, place one foot on the tip-assist and push down.
2) Slightly tip the wheelchair by simultaneously pressing down on the push handles.
40

7.13 Front frame

The product can be delivered with two front frame versions:
Standard front frame: The wheelchair features a straight front frame without abduction (see Page 6).
Abduction front frame: The frame is contoured to the outside by 20 mm on both the left and right sides (not
illustrated). This makes the entry area larger.

7.14 Lap belt (seat belt)

CAUTION
Incorrectly adjusted lap belt
Malpositions, illness, falling of the user due to installation/adjustment errors
► Do not modify the settings established by the qualified personnel. In case of problems with the adjustments
(unsatisfactory sitting position) please contact the qualified personnel who fitted the product.
► The lap belt has to fit closely but not too tightly so the user is not injured. It should be possible to slide two fin­
gers comfortably between the belt and thigh.
► Have the settings of the belt system checked regularly. Adjustments may be required due to the growth of the
user or because of changes in the course of the disease or different clothing.
The lap belt (seat belt) prevents the user from slipping and supports positioning.
It is installed on the product by qualified personnel if needed and adapted to the requirements of the user.
Information about subsequent acquisition and mounting is provided by the qualified personnel that handed over the
product.
Using the lap belt
1) Open the buckle.
2) Place the user in an upright, 90° seated position (if physiologically possible). Ensure that the back is up against
the back support pad (if physiologically possible).
3) Close the buckle.
4) The lap belt should be at an angle of about 60° to the seat bottom. The belt strap should run across the thighs
in front of the pelvic bones (see fig. 41).
Possible errors
The lap belt is positioned above the user's pelvis in the area of the soft part of the stomach.
The user does not sit upright in the seat.
Avantgarde XXL 2
Use
27

Advertisement

Table of Contents
loading

Table of Contents