Crutch Holder With Hook-And-Loop Fastening Strap; Head And Neckrest; Tray - Otto Bock Avantgarde XXL 2 Instructions For Use Manual

7.16 Crutch holder with hook-and-loop fastening strap

The crutch holder with hook-and-loop fastening strap allows crutches to be attached to the wheelchair.
43

7.17 Head and neckrest

Head/neckrests or headrests make it possible to support the head in case of various severe disability indications.
The head/neckrests or headrests consist of polyurethane foam and can be cleaned with mild soap and water.
The option is installed on the product by qualified personnel if needed and adapted to the requirements of the user.
The user may adjust the movable blocks of the headrest according to his/her preferences.
To do so, adjust the movable blocks into the desired position and tighten the wrench bolts to fix the headrest in
place.

7.18 Tray

WARNING
Inflammable product
Burns due to user error
► The product is flame retardant. Nevertheless, the possibility that it may catch fire cannot be entirely excluded
in case of exposure to an ignition source. Therefore, the utmost caution must be exercised in the vicinity of an
open flame.
► Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Improper adjustment
Crushing or pinching due to adjustments which are too tight
► Do not pinch the user when sliding in the product.
CAUTION
Driving with objects on the tray top
Injuries due to unsecured objects
► Remove all objects from the tray top prior to travelling.
CAUTION
Improper lifting by attendants
Tipping over, user falls due to lifting by removable components
► The product must not be lifted by the tray.
NOTICE
Overloading
Damage to the product due to user error
► Do not load the tray with heavy objects.
► No persons may sit or lean on the tray.
Avantgarde XXL 2
Use
29