Maintenance - Otto Bock 17B95 Instructions For Use Manual

5 Maintenance

Use only 633F7 Special Lubricant. To ensure proper function, make sure no
dirt particles enter the joint mechanism. Use appropriate protection devices
(e.g. joint covers), as necessary.
Attention!
Visible wear of the lock mechanism may affect the patient's safety.
Replace the wedge lock and/or the lower joint section, as neces-
sary.
Note
It is recommended that the function and condition of this orthosis be
checked every six months. The 513D19=3.8x16 Compression Springs
should be replaced at this time, or at the very latest once each year.
6 Liability
The manufacturer's warranty applies only if the product has been used
under the conditions and for the purposes described. The manufacturer
recommends that the product be used and maintained according to the
instructions for use.
7 CE conformity
This product meets the requirements of the 93/42/EWG guidelines for medi-
cal products. This product has been classified as a class I product accord-
ing to the classification criteria outlined in appendix IX of the guidelines.
The declaration of conformity was therefore created by Ottobock with sole
responsibility according to appendix VII of the guidelines.
8 | Ottobock