Simple Network Management Protocol; Supported Hardware; When You Are Done - Cisco Catalyst Express 500 User Manual

Chapter 1 Introduction

Simple Network Management Protocol

Supported Hardware

When You Are Done

OL-8122-01
You can use Simple Network Management Protocol (SNMP) management
applications to manage the switch. You also can manage it from an
SNMP-compatible workstation.
The switches support the PWR675-AC-RPS RPS. (Available only on the Catalyst
Express 500-24PC model.)
The switches support these Cisco SFP modules:
100BASE-BX
•
100BASE-FX
•
100BASE-LX
•
1000BASE-LX
•
1000BASE-SX
•
If you have not already installed the switch and configured its basic settings, see
Chapter 2, "Setup and Installation."
If you already installed and configured the switch with its basic settings, see
Chapter 3, "Customization,"
performance.
to learn about features that can optimize the switch
User Guide for the Catalyst Express 500 Switches
Supported Hardware
1-13