Estimated Assembly Time - Kubota LA1154A Assembly Instructions Manual

96 ASSEMBLY INSTRUCTIONS
1. Push the front hydraulic valve main switch. Make sure
the switch light turns on.
2. Press the activation switch-A, make sure hydraulic oil
is coming out from the port-A as long as the activation
switch is pressed.
3. Press the activation switch-B, make sure hydraulic oil
is coming out from the port-B as long as the activation
switch is pressed.
4. Push the front hydraulic valve main switch. Make sure
the switch light turns off.
5. Press the activation switch-A and switch-B, make sure
the front remote hydraulic valve does not operate.

ESTIMATED ASSEMBLY TIME

Refer to the following table for the estimated assembly
time from opening the crate to finishing assembling the
loader.
Assembly time on the table are just reference under
average conditions with the following assumptions.
(1) When assembly is performed by two workers.
(2) Following tools and equipment are prepared.
1. Chain hoist or crane.
2. Impact wrench, Ratchet wrench, Torque wrench,
Socket wrench, Spanner wrench.
3. Nylon strap.
Remote Valve Type Loader
LA1154A/EA 1.5 hours