Assembling Accumulator Kit; Accumulator [M6871] (If Equipped) - Kubota LA1154A Assembly Instructions Manual

ASSEMBLING ACCUMULATOR KIT

BAccumulator [M6871] (if equipped)
C Accumulator section [Self-level valve only]
A If the machine is equipped with the optional self-level
valve, fit the accompanying orifice to the accumulator
assembly (RH) in the following procedure.
A If the machine does not have a self-leveling valve, the
orifice is not needed.
1. Remove the adapter assy from the accumulator valve.
(1) Accumulator valve assy
(2) Adapter assy (3/4-UNF)
ASSEMBLY INSTRUCTIONS
2. Set the orifice into the port.
(1) Port
(A) Adapter side
(B) Accumulator valve side
A Be careful not to confuse the orifice direction.
3. Attach the adapter assy back to the accumulator
valve.
(1) Accumulator valve
(2) Adapter assy (3/4-UNF)
45