Table of Contents
Advertisement
3. Remove the bolts from the cover.
(1) 2-M8 x 35 bolts with washers
4. Attach the hitch stay assembly in place. Then connect
each of the hoses between its tube and stay adapter,
as shown below.
(1) Hydraulic hose hitch-1
(370 mm (14.6 in.), 3/4-UNF and 3/4-UNF)
(2) Hydraulic hose hitch-2
(370 mm (14.6 in.), 3/4-UNF and 3/4-UNF)
(3) 2-M8 x 40 bolts with washer
(4) Hitch stay assy
(5) Cover
ASSEMBLY INSTRUCTIONS
5. Connect the hydraulic hoses to the 3rd function
coupler stay assy.
(1) Hydraulic hose mid-1 (with male coupler) (Green)
(2) Hydraulic hose mid-2 (with female coupler) (Gray)
(3) 3rd function coupler stay assy
61
Advertisement
Table of Contents
