Table of Contents
Advertisement
76
ASSEMBLY INSTRUCTIONS
6. Remove the plug from the console. Remove the
plastic fastener from the 3rd function on/off switch, and
attach the switch onto the console.
(1) Console
(2) Plug
(3) Switch
A When removing the plastic fastener from the switch,
remain the rubber ring on the switch.
(1) Switch
(2) Plastic fastener
(3) Rubber ring
7. Connect the relays to the 3rd function harness.
(1) 2-Relays
8. Pass the 3rd function harness through the cabling hole
of the tractor step.
(1) Harness to 3rd function control lever
(2) Harness to ON/OFF switch
(3) Harness to tractor harness
(A) To 3rd function control lever
(B) To ON/OFF switch
(C) To tractor harness
(D) To solenoid valve
(E) To earth
Advertisement
Table of Contents
