Kubota LA1154A Assembly Instructions Manual page 80

78 ASSEMBLY INSTRUCTIONS
(1) 3rd function harness
(2) Loader valve tank hose
(3) 3rd function valve to loader valve pump hose
(4) 2-Clamps (72427-3133-30)
A Clamp the 3rd function harness at the white-taped
point.
13. Using the cross-shaped clamp, secure the 3rd function
harness to the hoses, as shown below.
(1) 3rd function harness
(2) 3rd function PB hose
(3) Clamps (72427-3133-30)
A Clamp the 3rd function harness at the yellow-taped
point.
14. Using the rivets and bolts first and then the console
cover, secure the console cover in place.
(1) 2-Rivets
(2) 3-Bolts with washers (with cap)
(3) Flange bolt
(4) Plain washer
(5) Console cover
C Valve cover section
Follow the instructions given in
" Independent Circuit Type with Standard Valve
[M6873] (if equipped)".
C Label section
Follow the instructions given in
" Independent Circuit Type with Standard Valve
[M6873] (if equipped)".