Table of Contents
Advertisement
3. Attach the tube guard in place.
(1) Tube guard
(2) 2-M18 x 35 bolts
2-M18 spring lock washers
4. Attach the accumulator valve cover in place.
(1) Accumulator valve cover
(2) 2-M8 x 20 bolts with washer
5. Apply the selector lever to the accumulator valve.
(1) Selector lever
(2) M8 lock nut
ASSEMBLY INSTRUCTIONS
A Secure the selector lever with the lock nut.
BAccumulator [M7993] (if equipped)
C Accumulator section [self-leveling valve only]
A If the machine is equipped with the optional self-level
valve, fit the accompanying orifice to the accumulator
assembly (RH) in the following procedure.
A If the machine does not have a self leveling valve, the
orifice is not needed.
1. Remove the adapter from the accumulator valve.
(1) Accumulator assy (RH)
(2) Adapter assy
2. Set the orifice into the port.
(1) Port
49
Advertisement
Table of Contents
