Table of Contents
Advertisement
74
ASSEMBLY INSTRUCTIONS
18. Connect the port A hose and port B hose to the 3rd
function coupler stay.
(1) Port A hose (Gray, 1340 mm (52.8 in.), 3/4-UNF)
(2) Port B hose (Green, 660 mm (30.0 in.), 3/4-UNF)
(3) 2-45 adapters (3/4-UNF)
A Check the hoses not for contact with the frames or
bolts or not for their mutual tight contact. If contacted,
readjust the adapter angles to avoid any contact.
C Boom section
Follow the instructions given in
"
Independent Circuit Type with Standard Valve
[M6873] (if equipped)".
C Controller section
1. Remove the rivets and bolts first and then the console
cover.
(1) 2-Rivets
(2) 3-Bolts with washers (with cap)
(3) Flange bolt
(4) Plain washer
(5) Console cover
A To draw out the rivets, loosen the screws first with a
screwdriver.
Advertisement
Table of Contents
